SDI to Analog Audio and Video Converter (now shipping)
(Auslieferung erfolgt ohne Netzteil - Dieses muß separat bestellt werden: 161583 / DWP-U)
Features
• SDI to Analog Audio and Video Converter
• SDI with Embedded Audio Input
• 2 Re-clocked, Loop-Thru SDI Outputs
• 10-bit Component or Composite Analog Video Outputs
• 4 ch Balanced Analog Audio Output
• Selectable Audio level
• Selectable Audio Channel Group
• External Dip Switch Configuration
The D10CEA converts SDI video with embedded audio to 10-bit component or composite analog video and 4 channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU N10), RGB, 1 composite or 1 Y/C (S-Video). The 4 ch analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio output channels can be selected as group 1-4 from SMPTE embedded audio. Audio level has 4 settings. Audio and video output connections are available on a 25 pin "D" subminiature connector - a break-out cable is supplied. All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Specifications
• Inputs SDI (SMPTE 259M) w/embedded audio, 1 x BNC
• Outputs: Video: YPbPr - SMPTE, Betacam, RGB, NTSC, PAL, YC (S-Video), 10-bits
• Audio:
- 4 Channel Balanced/Unbalanced
- Video/Audio outputs on 25-pin D connector
- 2 SDI Re-clocked loop-thru, 2 x BNC
• Frequency Response:
- Video, +/-.25db to 5.5 Mhz Y
- Audio, +/-.5db to 20Khz
• User Controls: (External Dip Switch)
- Video format
- Pedestal
- H&V blanking
- Audio group 1,2,3,4
- Audio level, -14, 0, +2, +4 dBu
• Size: 5.8" x 3.1" x 1" (147 x 79 x 25 mm)
• Power: +5VDC Regulated, 4 watts, Requires Power Supply |